

The following was copied from:
	"http://blogs.msdn.com/b/brada/archive/2005/01/26/361363.aspx"
	on DEC/5/2010
and does not belong to this project.



-----------------------------------------------------------------------
-----------------------------------------------------------------------
-----------------------------------------------------------------------



1. Introduction
-----------------------------------------------------------------------
First, read the .NET Framework Design Guidelines. 
Almost all naming conventions, casing rules, etc., are spelled out in this document.
Unlike the Design Guidelines document, you should treat this document as a set of suggested guidelines.  
These generally do not effect the customer view so they are not required.


   
2. Style Guidelines
-----------------------------------------------------------------------

2.1 Tabs & Indenting
-----------------------------------------------------------------------
Tab characters (\0x09) should not be used in code. 
All indentation should be done with 8 space characters.


2.2 Bracing
-----------------------------------------------------------------------
Open braces should always be at the beginning of the line after the statement that begins the block. 
Contents of the brace should be indented by 4 spaces. For example:

	if (someExpression)
	{
	   DoSomething();
	}
	else
	{
	   DoSomethingElse();
	}

case statements should be indented from the switch statement like this:

	switch (someExpression) 
	{

	   case 0:
	      DoSomething();
	      break;

	   case 1:
	      DoSomethingElse();
	      break;

	   case 2: 
	      {
	         int n = 1;
	         DoAnotherThing(n);
	      }
	      break;
	}

Braces should never be considered optional. Even for single statement blocks, you should always use braces. 
This increases code readability and maintainability.

	for (int i=0; i<100; i++) { DoSomething(i); }


2.3 Single line statements
-----------------------------------------------------------------------
Single line statements can have braces that begin and end on the same line.

	public class Foo
	{
	   int bar;

	   public int Bar
	   {
	      get { return bar; }
	      set { bar = value; }
	   }

	}

It is suggested that all control structures (if, while, for, etc.) use braces, but it is not required.


2.4 Commenting
-----------------------------------------------------------------------
Comments should be used to describe intention, algorithmic overview, and/or logical flow.  
It would be ideal, if from reading the comments alone, someone other than the author could understand a functions intended behavior and general operation. 
While there are no minimum comment requirements and certainly some very small routines need no commenting at all, it is hoped that most routines will have comments reflecting the programmers intent and approach.


2.4.1 Copyright notice
-----------------------------------------------------------------------
Each file should start with a copyright notice. To avoid errors in doc comment builds, 
you dont want to use triple-slash doc comments, but using XML makes the comments easy to replace in the future. Final text will vary by product (you should contact legal for the exact text), 
but should be similar to:

	//-----------------------------------------------------------------------
	// <copyright file="ContainerControl.cs" company="Microsoft">
	//     Copyright (c) Microsoft Corporation.  All rights reserved.
	// </copyright>
	//-----------------------------------------------------------------------


2.4.2 Documentation Comments
-----------------------------------------------------------------------
All methods should use XML doc comments. For internal dev comments, the <devdoc> tag should be used.

	public class Foo 
	{

	/// <summary>Public stuff about the method</summary>
	/// <param name=bar>What a neat parameter!</param>
	/// <devdoc>Cool internal stuff!</devdoc>
	///
	public void MyMethod(int bar) {  }

	}

However, it is common that you would want to move the XML documentation to an external file  for that, use the <include> tag.

	public class Foo 
	{

	   /// <include file='doc\Foo.uex' path='docs/doc[@for="Foo.MyMethod"]/*' />
	   ///
	   public void MyMethod(int bar) {  }

	}


2.4.3 Comment Style
-----------------------------------------------------------------------
The // (two slashes) style of comment tags should be used in most situations. 
Where ever possible, place comments above the code instead of beside it.  
Here are some examples:

	// This is required for WebClient to work through the proxy
	GlobalProxySelection.Select = new WebProxy("http://itgproxy");


	// Create object to access Internet resources
	//
	WebClient myClient = new WebClient();

Comments can be placed at the end of a line when space allows:

	public class SomethingUseful 
	{
	    private int          itemHash;            // instance member
	    private static bool  hasDoneSomething;    // static member
	}


2.5 Spacing
-----------------------------------------------------------------------
Spaces improve readability by decreasing code density. 
Here are some guidelines for the use of space characters within code:

Do use a single space after a comma between function arguments.
	Right:          Console.In.Read(myChar, 0, 1);
	Wrong:       	Console.In.Read(myChar,0,1); 
 
Do not use a space after the parenthesis and function arguments
	Right:          CreateFoo(myChar, 0, 1)
	Wrong:       	CreateFoo( myChar, 0, 1 ) 

Do not use spaces between a function name and parenthesis.
	Right:          CreateFoo()
	Wrong:       	CreateFoo ()
 
Do not use spaces inside brackets.
	Right:    	x = dataArray[index];
	Wrong:       	x = dataArray[ index ]; 

Do use a single space before flow control statements
	Right:          while (x == y)
	Wrong:       	while(x==y)
 
Do use a single space before and after comparison operators
	Right:          if (x == y)
	Wrong:       	if (x==y) 


2.6 Naming
-----------------------------------------------------------------------
Follow all .NET Framework Design Guidelines for both internal and external members. 
Highlights of these include:

	Do not use Hungarian notation 
	Do not use a prefix for member variables (_, m_, s_, etc.). 
	If you want to distinguish between local and member variables you should use this. in C# and Me. in VB.NET. 
	Do use camelCasing for member variables 
	Do use camelCasing for parameters 
	Do use camelCasing for local variables 
	Do use PascalCasing for function, property, event, and class names 
	Do prefix interfaces names with I 
	Do not prefix enums, classes, or delegates with any letter 

The reasons to extend the public rules (no Hungarian, no prefix for member variables, etc.) 
is to produce a consistent source code appearance. In addition a goal is to have clean readable source. Code legibility should be a primary goal.


2.7 Naming Conventions
-----------------------------------------------------------------------

2.7.1 Interop Classes
-----------------------------------------------------------------------
Classes that are there for interop wrappers (DllImport statements) should follow the naming convention below:

NativeMethods  	No suppress unmanaged code attribute, 
			these are methods that can be used anywhere because a stack walk will be performed. 
UnsafeNativeMethods  	Has suppress unmanaged code attribute. These methods are potentially dangerous 
			and any caller of these methods must do a full security review to ensure that the 			usage is safe and protected as no stack walk will be performed. 
SafeNativeMethods  	Has suppress unmanaged code attribute. 
			These methods are safe and can be used fairly safely and the caller isnt 
			needed to do full security reviews even though no 			stack walk will be performed. 

	class NativeMethods 
	{
	   private NativeMethods() {}


	   [DllImport(user32)]
	   internal static extern void FormatHardDrive(string driveName);
	}

	[SuppressUnmanagedCode]
	class UnsafeNativeMethods 
	{
	   private UnsafeNativeMethods() {}

	   [DllImport(user32)]
	   internal static extern void CreateFile(string fileName);
	}

	[SuppressUnmanagedCode]
	class SafeNativeMethods 
	{
	   private SafeNativeMethods() {}

	   [DllImport(user32)]
	   internal static extern void MessageBox(string text);
	}

All interop classes must be private, and all methods must be internal. 
In addition a private constructor should be provided to prevent instantiation.


2.8 File Organization
-----------------------------------------------------------------------
Source files should contain only one public type, although multiple internal classes are allowed. 
Source files should be given the name of the public class in the file. 
Directory names should follow the namespace for the class. 

For example, I would expect to find the public class System.Windows.Forms.Control in System\Windows\Forms\Control.cs

Classes member should be alphabetized, and grouped into sections 
(Fields, Constructors, Properties, Events, Methods, Private interface implementations, Nested types) 
Using statements should be inside the namespace declaration. 

	namespace MyNamespace 
	{

		using System;

		public class MyClass : IFoo 
		{

		      // fields
		      int foo;

		      // constructors
		      public MyClass() {  }
	
		      // properties
		      public int Foo { get {  } set {  } }
	
		      // events
		      public event EventHandler FooChanged { add {  } remove {  } }
	
		      // methods
		      void DoSomething() {  }
		      void FindSomethind() {  }

		      //private interface implementations
		      void IFoo.DoSomething() { DoSomething(); }

		      // nested types
		      class NestedType {  }

		}

	}